Update to v6.6.153 - #365
Open
DaftB0t wants to merge 157 commits into
Open
Conversation
[ Upstream commit 26cb8ebbfaf713c82e142d08828d4d765057633b ] disk_release() undoes blk_mq_init_allocated_queue() for a disk whose probe failed before add_disk(), but it only calls blk_mq_exit_queue(). Nothing there stops q->timeout, and that timer rolls forward: it stays pending until it next expires, not until the last request completes. So if the driver issued any I/O before adding the disk, the request_queue is freed while still linked into a timer wheel bucket. Commit 6f8191f ("block: simplify disk shutdown") dropped the blk_cleanup_queue() call that used to stop it. __del_gendisk() and blk_mq_destroy_queue() still do; only the probe failure path lost it. nvme gets there because nvme_update_ns_info() submits Report Zones or FDP io-mgmt-recv on ns->queue before the disk is added, so a later failure - a concurrent reset setting NVME_CTRL_FROZEN, or device_add_disk() failing - lands in put_disk() with the timer armed: BUG: KASAN: slab-use-after-free in detach_if_pending+0x30c/0x340 Write of size 8 at addr ffff888004d71310 by task kworker/u8:2/37 __timer_delete_sync+0x156/0x240 kernel/time/timer.c:1621 blk_sync_queue+0x22/0x40 block/blk-core.c:222 nvme_sync_queues+0x100/0x150 drivers/nvme/host/core.c:5362 nvme_reset_work+0x138/0x930 drivers/nvme/host/pci.c:3264 Allocated by task 34: __blk_mq_alloc_disk+0x33/0x100 block/blk-mq.c:4462 nvme_alloc_ns+0x290/0x3870 drivers/nvme/host/core.c:4146 Freed by task 0: blk_free_queue_rcu+0x3a/0x50 block/blk-core.c:254 rcu_core+0xc10/0x1730 kernel/rcu/tree.c:2857 The queue being synced there is ctrl->admin_q, only a victim sharing a timer wheel bucket with the freed queue's dangling entry; other runs tripped in enqueue_timer(), __run_timers() or blk_mq_timeout_work(). Failing nvme_alloc_ns() with a debug patch makes it deterministic: one leaked timer trips KASAN within seconds, while 1987 patched releases produced no splat. Stop the timer and the queue work items before blk_mq_exit_queue(), like blk_mq_destroy_queue() does. Found by FuzzNvme. Fixes: 6f8191f ("block: simplify disk shutdown") Acked-by: Weidong Zhu <weizhu@fiu.edu> Signed-off-by: Chao Shi <coshi036@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://patch.msgid.link/20260727201257.211635-1-coshi036@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit edf7e90 upstream. As JY reported in bugzilla [1], Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 pc : [0xffffffe51d249484] f2fs_is_cp_guaranteed+0x70/0x98 lr : [0xffffffe51d24adbc] f2fs_merge_page_bio+0x520/0x6d4 CPU: 3 UID: 0 PID: 6790 Comm: kworker/u16:3 Tainted: P B W OE 6.12.30-android16-5-maybe-dirty-4k #1 5f7701c9cbf727d1eebe77c89bbbeb3371e895e5 Tainted: [P]=PROPRIETARY_MODULE, [B]=BAD_PAGE, [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Workqueue: writeback wb_workfn (flush-254:49) Call trace: f2fs_is_cp_guaranteed+0x70/0x98 f2fs_inplace_write_data+0x174/0x2f4 f2fs_do_write_data_page+0x214/0x81c f2fs_write_single_data_page+0x28c/0x764 f2fs_write_data_pages+0x78c/0xce4 do_writepages+0xe8/0x2fc __writeback_single_inode+0x4c/0x4b4 writeback_sb_inodes+0x314/0x540 __writeback_inodes_wb+0xa4/0xf4 wb_writeback+0x160/0x448 wb_workfn+0x2f0/0x5dc process_scheduled_works+0x1c8/0x458 worker_thread+0x334/0x3f0 kthread+0x118/0x1ac ret_from_fork+0x10/0x20 [1] https://bugzilla.kernel.org/show_bug.cgi?id=220575 The panic was caused by UAF issue w/ below race condition: kworker - writepages - f2fs_write_cache_pages - f2fs_write_single_data_page - f2fs_do_write_data_page - f2fs_inplace_write_data - f2fs_merge_page_bio - add_inu_page : cache page #1 into bio & cache bio in io->bio_list - f2fs_write_single_data_page - f2fs_do_write_data_page - f2fs_inplace_write_data - f2fs_merge_page_bio - add_inu_page : cache page #2 into bio which is linked in io->bio_list write - f2fs_write_begin : write page #1 - f2fs_folio_wait_writeback - f2fs_submit_merged_ipu_write - f2fs_submit_write_bio : submit bio which inclues page #1 and #2 software IRQ - f2fs_write_end_io - fscrypt_free_bounce_page : freed bounced page which belongs to page #2 - inc_page_count( , WB_DATA_TYPE(data_folio), false) : data_folio points to fio->encrypted_page the bounced page can be freed before accessing it in f2fs_is_cp_guarantee() It can reproduce w/ below testcase: Run below script in shell #1: for ((i=1;i>0;i++)) do xfs_io -f /mnt/f2fs/enc/file \ -c "pwrite 0 32k" -c "fdatasync" Run below script in shell #2: for ((i=1;i>0;i++)) do xfs_io -f /mnt/f2fs/enc/file \ -c "pwrite 0 32k" -c "fdatasync" So, in f2fs_merge_page_bio(), let's avoid using fio->encrypted_page after commit page into internal ipu cache. Fixes: 0b20fce ("f2fs: cache global IPU bio") Reported-by: JY <JY.Ho@mediatek.com> Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> [Jiucheng Xu: backport to 6.6.y] Signed-off-by: Jiucheng Xu <jiucheng.xu@amlogic.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cdcc4e46180df8161f4d2f3c6fd6beaf6990133d upstream. IPVS configuration paths update destination availability while connection accounting updates destination overload state. The two independent states share dest->flags, so their read-modify-write updates can race and lose one another. Keep OVERLOAD in flags, where the preceding patch serializes its updates with dst_lock, and move AVAILABLE to cflags. This keeps configuration- controlled availability out of the scheduler hot cacheline until a scheduler needs to check it. It also prevents availability updates from clobbering overload state. The destination status bits are not exposed through the IPVS sockopt or netlink interfaces, so keep their definitions in the internal IPVS header. Readers can still observe stale destination state; this does not provide a cross-field snapshot. Fixes: 1da177e ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn> Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn> Reported-by: Ao Wang <wangao@seu.edu.cn> Reported-by: Xuewei Feng <fengxw06@126.com> Reported-by: Qi Li <qli01@tsinghua.edu.cn> Reported-by: Ke Xu <xuke@tsinghua.edu.cn> Link: https://lore.kernel.org/all/8913381c-1e02-35c7-0ec4-61de5a12fd35@ssi.bg/ Assisted-by: Claude-Code:GLM-5.2 Suggested-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> (cherry picked from commit cdcc4e46180df8161f4d2f3c6fd6beaf6990133d) [ Julian: Backport by removing the hunks from ip_vs_xmit.c ] Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65267c9c4f28199985505977bc2c628c82fc50ef ] In mana_remove(), when a NULL port is encountered in the port iteration loop, 'goto out' skips the mana_destroy_eq(ac) call, leaking the event queues allocated earlier by mana_create_eq(). This can happen when mana_probe_port() fails for port 0, leaving ac->ports[0] as NULL. On driver unload or error cleanup, mana_remove() hits the NULL entry and jumps past mana_destroy_eq(). Change 'goto out' to 'break' so the for-loop exits normally and mana_destroy_eq() is always reached. Remove the now-unreferenced out: label. Fixes: 1e2d082 ("net: mana: Add support for EQ sharing") Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com> Link: https://patch.msgid.link/20260420124741.1056179-6-ernis@linux.microsoft.com Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> [ hmahfooz: resolve conflict in mana_remove() due to missing commit 3b194343c250 ("net: mana: Implement ndo_tx_timeout and serialize queue resets per port.") ] Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a93d37a09b863810653f93d371fb197457d59deb upstream. p_bools.nprim comes from the policy image independently of how many booleans follow it, and cond_index_bool() fills bool_val_to_struct[] at value - 1, so a count larger than the values present leaves NULL entries. Every user of that array then walks it by index and dereferences each entry: cond_evaluate_expr() on the access-vector path, security_get_bools() and security_get_bool_value() behind selinuxfs, and security_set_bools(). A sparse class value is absorbed by policydb_class_isvalid() and its siblings; booleans have no such predicate, and no consumer that could use one. Reject a boolean value that no boolean defines, once, where the array is built. Conforming policies define every boolean they declare and are unaffected. Cc: stable@vger.kernel.org Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me> Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a82dcd98b6e6e11cfd162410967951f12152528 upstream. security_get_permissions() maps an inherited common's permissions into an array sized by the class's own permissions.nprim, but class_read() takes that nprim verbatim from the policy image and never checks that it covers the common. A class that inherits a common of N permissions while declaring a smaller nprim is accepted, and on load the common's permissions are written past the class-sized array -- an out-of-bounds heap write. Reject a class whose permission count is below its inherited common's. Well-formed policies, where the class count already includes the inherited permissions, are unaffected. Cc: stable@vger.kernel.org Fixes: 55fcf09 ("selinux: add support for querying object classes and permissions from the running policy") Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me> Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e5c0235a3c4e9eb047a16cd02323fe4ecf2f570e upstream. sel_write_load() calls selinux_policy_cancel() when sel_make_policy_nodes() fails, and that helper dereferences the outgoing policy to cancel its sidtab conversion. On the first policy load there is no outgoing policy: security_load_policy() returns early for that case, before it converts anything, and state->policy is still NULL. A first load that fails while building the selinuxfs tree therefore takes a NULL dereference in selinux_policy_cancel(), reached from a write(2) to /sys/fs/selinux/load. Skip the cancel when there is no old policy, mirroring the check security_load_policy() already makes before it converts. Cc: stable@vger.kernel.org Fixes: 02a52c5 ("selinux: move policy commit after updating selinuxfs") Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me> Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 22b05fec62c0fe9864cfceb52f7d0f3a34d9b1dd upstream. security_get_classes() sizes an array by p_classes.nprim and fills it at value - 1, so a class value the policy never defines leaves a NULL. sel_make_classes() passes every entry to sel_make_dir(), reaching the same d_alloc_name() dereference as the permission array. The class symbol table is allowed to be sparse (policydb_class_isvalid() exists to absorb that), but this getter builds its own array straight from the hash table and has no such predicate. Fail the lookup when a value went unclaimed instead of handing out the NULL. Conforming policies define every class they declare and are unaffected. Cc: stable@vger.kernel.org Fixes: 55fcf09 ("selinux: add support for querying object classes and permissions from the running policy") Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me> Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca318e7bbb7723f57bcd9e69a2873b5884435552 upstream. check_transfer() compares the input and output files byte-by-byte using `cmp -l "$in" "$out" | while read ...`. Because the while-loop body runs in a subshell (the script sets neither lastpipe nor pipefail), the fail_test call inside it -- which sets the global ret/last_test_failed -- and the `return 1` both act on the subshell, not on check_transfer(). check_transfer() thus always falls through to `return 0`, and any data corruption affecting only the payload (leaving the subflow/PM counters untouched) is silently reported as PASS. Fixes: 8117dac ("selftests: mptcp: add invert check in check_transfer") Cc: stable@vger.kernel.org Signed-off-by: Gang Yan <yangang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-5-b8f496d71664@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b6ee361524641f57b2e2363f7737f20e17f67827 upstream. Some MPTCP suboptions are mutually exclusive according to the RFC8684, but also because in different places, the code doesn't expect some combinations to be present. That's specially true for suboptions that would be present twice, but with different attributes. The new restrictions are the same as the ones applied on the output side, with mptcp_write_options. The same rules can be reused with a small fix: an MP_FASTCLOSE can be used with a DSS when the sender picks this option [1], which is not the case on Linux. Here are the rules: Which options can be used together? X: mutually exclusive O: often used together C: can be used together in some cases P: could be used together but we prefer not to (optimisations) | Opt: | MPC | MPJ | DSS | ADD | RM | PRIO | FAIL | FC | |------|------|------|------|------|------|------|------|------| | MPC |------|------|------|------|------|------|------|------| | MPJ | X |------|------|------|------|------|------|------| | DSS | X | X |------|------|------|------|------|------| | ADD | X | X | P |------|------|------|------|------| | RM | C | C | C | P |------|------|------|------| | PRIO | X | C | C | C | C |------|------|------| | FAIL | X | X | C | X | X | X |------|------| | FC | X | X | P | X | X | X | X |------| | RST | X | X | X | X | X | X | O | O | |------|------|------|------|------|------|------|------|------| The only difference is with the 'P': another stack could send and ADD_ADDR with other suboptions (DSS, RM_ADDR), and this should be allowed. A few points of attention: - In theory, an MP_CAPABLE could be used with a RM_ADDR, but there is no reason to add it with a SYN. Note that even with a 4th ACK, it doesn't seem to be useful, except when IDs are known in advance via another channel. Better not to break that. - Now, combining both an MP_CAPABLE and an MP_JOIN will no longer result to a reject of the two options, but only the second suboption is ignored. That seems OK to do that for this unexpected error. At least now all inconsistent combinations are handled the same way. This could change later in next. This also means the explicit checks for having both MPC + MPJ in subflow.c will now be unreachable. That's fine, they will be removed in a follow-up patch. - In case of conflicting combinations, the extra suboption(s) is/are ignored: having such combinations either means the remote peer is buggy, or is evil. The simplest action is then taken in this case: stop processing the current suboption. - In mp_opt->suboptions, there is also a bit reserved to the checksum, which can be used in an MP_CAPABLE and a DSS. Each time a DSS option can be used in parallel with another option, the checksum can be set, so the verification is combined into a new OPTIONS_MPTCP_DSS macro. - An MP_CAPABLE ACK can carry a Data-Level Length, and an optional Checksum: they are the same as the ones found in a DSS, because a DSS cannot be used in parallel to an MP_CAPABLE. Similarly, even if there is room, a DSS cannot be used with an MP_JOIN. Fixes: eda7acd ("mptcp: Handle MPTCP TCP options") Cc: stable@vger.kernel.org Link: https://www.rfc-editor.org/rfc/rfc8684.html#section-3.5-5.1 [1] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-2-b8f496d71664@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35772b4981f38ba8059372cde8753e8e477e98ec upstream. A remote peer could send a malformed DSS with a wrong size, followed by another DSS or MPC + Data. In this case, the first suboption will be ignored, but leaving some fields written, which could lead to inconsistency or access uninitialized data. Explicitly reset the fields that could have been modified in case of unexpected size. Link: https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260728-net-mptcp-misc-fixes-7-2-rc6-v1-0-f7e2d229159d%40kernel.org?part=1 Fixes: 648ef4b ("mptcp: Implement MPTCP receive path") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-1-b8f496d71664@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e00b63056fb4f261455b3e5df5268a1f8ce47a87 upstream. Passive TCP Fast Open accepts a valid-cookie SYN even when it carries no data. In that case the child socket's receive queue is intentionally left empty. mptcp_fastopen_subflow_synack_set_params() set is_mptfo before checking for queued SYN data. That made data-less TFO SYNs hit a WARN and, if the warning was non-fatal, left stale MPTFO state behind. The stale flag could later trigger a state-confusion bug in check_fully_established(). Only mark the subflow as MPTFO after confirming that an SKB was queued. Return quietly when the receive queue is empty. Note that mptcp_subflow_context's is_mptfo field is now not just about subflows where the TFO was present, but about MPTFO subflow that consumed SYN data. Only having a valid cookie but not carrying data is not really "doing TFO". Fixes: 36b122b ("mptcp: add subflow_v(4,6)_send_synack()") Cc: stable@vger.kernel.org Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Reported-by: Zhengchuan Liang <zcliangcn@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Signed-off-by: Wyatt Feng <bronzed_45_vested@icloud.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-7-b8f496d71664@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d141f087b1af656f055d7c5793a3e87817ba0bbe upstream.
qeth_snmp_command() and qeth_l3_arp_query() allocate a buffer sized by
a user-supplied length (udata_len) without checking a lower bound, then
set udata_offset to a fixed non-zero value and pass both to a reply
callback. The callback bounds-checks the copy with
if ((udata_len - udata_offset) < len)
Both fields are u32, so a udata_len smaller than udata_offset makes the
subtraction wrap and the check pass, and the following memcpy() writes
past the allocation. A udata_len of 0 also yields ZERO_SIZE_PTR from
kzalloc(), which the existing NULL check does not catch.
Reject buffers smaller than udata_offset before allocating, so the
callback subtraction can no longer underflow.
Fixes: 4a71df5 ("qeth: new qeth device driver")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Hidayath Khan <hidayath@linux.ibm.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260730142216.218309-1-hidayath@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e780e4917d43683224812400fe3dc4816fceba75 upstream. If either tplg_ops->dai_config or widget_kcontrol_setup fail during widget setup we would double decrement the use_count of the widget because the sof_widget_free_unlocked() would be called twice, similarly the core_put would be invoked twice as well. Since the use_count and core_put() is handled within the widget_free function we need to return without falling through the pipe_widget_free label. The fixes tag is picked to the last change around this part of the code which is adequately old enough for backporting purposes. Link: thesofproject/sof#10826 Fixes: 31ed8da ("ASoC: SOF: sof-audio: Modify logic for enabling/disabling topology cores") Cc: stable@vger.kernel.org Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://patch.msgid.link/20260730085914.27546-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4fe3e046524e5de3c04c6eef3743780cbdc231c upstream. reg_defaults must be sorted by ascending register address, as regcache_lookup_reg() locates entries in it with bsearch(). See commit fd80df3 ("regcache: Add support for sorting defaults arrays"). cs4265_reg_defaults[] lists CS4265_INT_MASK (0x0e), CS4265_STATUS_MODE_MSB (0x0f) and CS4265_STATUS_MODE_LSB (0x10) after CS4265_SPDIF_CTL1 (0x11) and CS4265_SPDIF_CTL2 (0x12), so the binary search does not find those three entries. regcache_reg_needs_sync() then cannot compare them against their default and reports that a sync is needed, so they are written to the device on every regcache_sync() even when they were never touched. Sort the table by register address. Fixes: fb6f806 ("ASoC: Add support for the CS4265 CODEC") Cc: stable@vger.kernel.org Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://patch.msgid.link/20260805082413.26174-4-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f39a68ed08bb6eef0ae711b41d645ee5e9448c09 upstream. reg_defaults must be sorted by ascending register address, as regcache_lookup_reg() locates entries in it with bsearch(). See commit fd80df3 ("regcache: Add support for sorting defaults arrays"). cs35l45_defaults[] lists the DSP1_RX*_RATE and DSP1_TX*_RATE registers (0x02b80080 - 0x02b802b8) in the middle of the table, ahead of entries with much lower addresses, so the binary search does not find 36 of its 73 entries. regcache_reg_needs_sync() then cannot compare those against their default and reports that a sync is needed, so they are written to the device on every regcache_sync() even when they were never touched. Sort the table by register address. Fixes: 74b14e2 ("ASoC: cs35l45: DSP Support") Cc: stable@vger.kernel.org Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://patch.msgid.link/20260805082413.26174-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d74aac116cfb2058b15df53996d23232b310f7ff upstream. reg_defaults must be sorted by ascending register address, as regcache_lookup_reg() locates entries in it with bsearch(). See commit fd80df3 ("regcache: Add support for sorting defaults arrays"). cs35l41_reg[] lists CS35L41_BSTCVRT_PEAK_CUR (0x3808) after CS35L41_BSTCVRT_COEFF (0x3810) and CS35L41_BSTCVRT_SLOPE_LBST (0x3814), so the binary search does not find those two entries. regcache_reg_needs_sync() then cannot compare them against their default and reports that a sync is needed, so they are written to the device on every regcache_sync() even when they were never touched. Sort the table by register address. Fixes: 5f2f539 ("ASoC: cs35l41: Correct handling of some registers in the cache") Cc: stable@vger.kernel.org Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://patch.msgid.link/20260805082413.26174-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 56f24311fd5607588a47e44675195a9efb200f29 upstream. EAR SPKR PA Gain" and the four "WSA RX* Mux" controls are enumerated, but their get and put callbacks access the value through ucontrol->value.integer.value[0] (a long) instead of ucontrol->value.enumerated.item[0] (an unsigned int). This same pattern was fixed in the sibling drivers by commit bcfe5f7 ("ASoC: codecs: rx-macro: fix accessing array out of bounds for enum type") and commit 0ea5eff ("ASoC: codecs: va-macro: fix accessing array out of bounds for enum type"), but wsa-macro was missed. On 64-bit kernels with CONFIG_SND_CTL_DEBUG this trips the elem value sanity check and every read of these controls fails with -EINVAL. Fixes: 809bcbc ("ASoC: codecs: lpass-wsa-macro: Add support to WSA Macro") Fixes: 2c4066e ("ASoC: codecs: lpass-wsa-macro: add dapm widgets and route") Assisted-by: Claude:claude-fable-5 Cc: stable@vger.kernel.org Signed-off-by: Dawid Wróbel <me@dawidwrobel.com> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Link: https://patch.msgid.link/20260730-worktree-lpass-tx-macro-enum-fix-v2-2-6d091c736116@dawidwrobel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 81cc73be40c6f028f1ee3f438ace46afe666dbae upstream. In fb_io_read(), if copy_to_user() performs a partial copy (e.g., due to a faulty user buffer), the loop adjusts the chunk size 'c' and updates the remaining 'count'. However, the hardware 'src' pointer has already been eagerly advanced by the original chunk size. If the loop is allowed to continue, the read will resume from an incorrect, over-advanced offset. Since the remaining 'count' was only decremented by the successful bytes, this desynchronization causes the next iterations to execute more hardware reads than originally bounded, eventually leading to out-of-bounds I/O reads. Fix this by breaking out of the loop immediately upon a partial copy_to_user(). A partial copy indicates a faulty user buffer, making subsequent read attempts futile. Breaking out ensures we return the number of successfully read bytes without risking out-of-bounds hardware accesses in subsequent mismatched iterations. Fixes: 6121cd9 ("fbdev: Move I/O read and write code into helper functions") Cc: stable@vger.kernel.org Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9e5f51549000e2665e3b5e02ff876b9e09cfe95 upstream. amdgpu_pci_remove() calls drm_dev_unplug() before invoking the fini routines. After drm_dev_unplug() the drm_dev_enter() guard in amdgpu_ttm_fini() always returns false, so iounmap() for aper_base_kaddr is silently skipped. On connected_to_cpu hardware ioremap_cache() maps the aperture as WB; when iounmap() is skipped the stale WB PAT entry persists. On reload IP discovery's memremap(MEMREMAP_WC) on the same aperture range hits a WB/WC conflict, producing an ioremap error and failing re-probe. Remove the drm_dev_enter() guard and call iounmap() unconditionally. The aperture mapping is plain MMIO and does not require device-presence protection. Surprise-removal cleanup of aper_base_kaddr is already handled unconditionally by amdgpu_device_unmap_mmio(). Fixes: 62d5f9f ("drm/amdgpu: Unmap MMIO mappings when device is not unplugged") Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit fb3f68af9f6fce9343a2bd13b4d68a1c02d283df) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d971337ebfad0b173cb46097c709db174ac3557 upstream. Add the VID/PID for the ZENAIM LEVERLESS controller to xpad_device and the VID to xpad_table. Signed-off-by: KADOTA, Kyohei <lufia@lufia.org> Link: https://patch.msgid.link/CAFMepckDUuOHiDDVVhUYc-UqJMeCqrWSfCuxbJ2x2sGgdDD4nw@mail.gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 649c10bff5cb7a514bf299094833ec8c9190aac3 upstream. The checks on num_vfs in pseries_pci_sriov_enable() are ANDed where OR was apparently intended. Change it to OR. Fixes: 9a7f6b4 ("powerpc/pseries/pci: Associate PEs to VFs in configure SR-IOV") Acked-by: Nayna Jain <nayna@linux.ibm.com> Tested-by: R Nageswara Sastry <rnsastry@linux.ibm.com> Cc: stable@vger.kernel.org # 4.16 Signed-off-by: George Wilson <gcwilson@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6058f0fea10f3caf63a435677358d1b8e9325114 upstream. During F55 sensor detection, the transmitter (TX) electrode count was incorrectly assigned the value of the receiver (RX) electrode count due to copy-paste typos. This incorrect value was then propagated to the driver data and used by F54 to determine the diagnostics report size. On devices with more RX than TX electrodes, this inflated the perceived TX count, leading to incorrect report size calculations and potential out-of-bounds buffer accesses. Fix the typos by correctly assigning the TX electrode counts. Fixes: 6adba43 ("Input: synaptics-rmi4 - add support for F55 sensor tuning") Fixes: c762cc6 ("Input: synaptics-rmi4 - propagate correct number of rx and tx electrodes to F54") Reported-by: sashiko-bot@kernel.org Cc: stable@vger.kernel.org Assisted-by: Antigravity:gemini-3.5-flash Link: https://patch.msgid.link/20260626051802.4033172-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…acket commit 296736076b3fd078742651c719555a488624023a upstream. Make finger2 (and also finger1) unsigned, so that if the finger index in the packet is 0 then subtracting 1 creates an array index which overflows above the existing check for FOC_MAX_FINGERS, as the existing comment says it should, instead of writing to state->fingers[-1]. Fixes: 05be1d0 ("Input: psmouse - support for the FocalTech PS/2 protocol extensions") Signed-off-by: Richard Davies <richard@arachsys.com> Link: https://patch.msgid.link/20260701190932.14960-1-richard@arachsys.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 732f38c36059e68ba3b4b89c56911d777fd3185c upstream. psxpad_spi_suspend() retrieves the controller state with spi_get_drvdata(), but probe never stores it, so suspend dereferences a NULL pointer. Store it during probe. Fixes: 8be193c ("Input: add support for PlayStation 1/2 joypads connected via SPI") Signed-off-by: Linmao Li <lilinmao@kylinos.cn> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260721055551.1714965-1-lilinmao@kylinos.cn Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…oard commit 3a046db33bb9f28b43a951a7a090db771dc0f8b3 upstream. The internal keyboard of the Xiaomi Book Pro 14 does not work unless atkbd skips deactivating it at the end of atkbd_probe(). Using 'i8042.dumbkbd=1' also makes the keyboard work, but then the driver never writes to the keyboard at all, so the Caps Lock LED is lost. The atkbd_deactivate_fixup quirk fixes both without a boot parameter. DMI: XIAOMI Xiaomi Book Pro 14/TM2424, BIOS XMAPT4B0P0909 05/06/2026 Signed-off-by: Zhefu Zhang <a723356@gmail.com> Reviewed-by: Andrew Zhou <zhoulol888@gmail.com> Link: https://patch.msgid.link/20260802031559.19701-1-a723356@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5751c781d3c97ab6ce0e2a966156ed882152c415 upstream. iforce_process_packet() reads fixed fields from joystick, wheel and status packets without first checking their lengths. In particular, the shared hats-and-buttons helper unconditionally reads data[6]. The status tail is a sequence of 16-bit effect addresses, but an incomplete final address is also consumed. A successful zero-length USB URB additionally reads the packet ID before the common parser is called. Reject the zero-length USB transfer, require the seven-byte joystick and wheel prefixes and the two-byte status prefix, and consume only complete status-tail addresses. Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn> Link: https://patch.msgid.link/20260720115018.75045-1-pengpeng@iscas.ac.cn Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb442a6673ff1046bf67754957d95880fdb394b5 upstream. In lparcfg_write(), a count of 0 results in kbuf[] being indexed at -1. Check for count == 0 in the existing check for count > sizeof(kbuf) and return -EINVAL if true. Fixes: 74422e2 ("powerpc/pseries: Remove VLA from lparcfg_write()") Acked-by: Nayna Jain <nayna@linux.ibm.com> Tested-by: R Nageswara Sastry <rnsastry@linux.ibm.com> Cc: stable@vger.kernel.org # 4.20 Signed-off-by: George Wilson <gcwilson@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc76c3c8e8ad09362b8c1561f3928288c15cba2e upstream. In rmi_f54_work(), if an error occurs during report request or command verification, the code jumped directly to the 'error' label, bypassing the 'abort' label where f54->report_size was normally zeroed out. This left f54->report_size containing its previous successful payload size. If a user then altered the V4L2 format to a smaller size, and a subsequent run failed, rmi_f54_buffer_queue() would copy the stale, larger payload size into the shrunken V4L2 buffer, causing a heap buffer overflow. Fix this by merging the 'abort' and 'error' labels into a single 'out' exit path, and ensuring that f54->report_size is always set to 0 on failure by checking for error and zeroing the local report_size first. Fixes: 3a762db ("[media] Input: synaptics-rmi4 - add support for F54 diagnostics") Cc: stable@vger.kernel.org Reported-by: sashiko-bot@kernel.org Assisted-by: Antigravity:gemini-3.5-flash Link: https://patch.msgid.link/20260626051802.4033172-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…ffer
commit 49c5adc2b7d6e43c5cf033e1c86fdb9c16ababb1 upstream.
rmi_f54_work() reads a diagnostics report from the device into
f54->report_data, sizing the transfer with rmi_f54_get_report_size():
report_size = rmi_f54_get_report_size(f54);
...
for (i = 0; i < report_size; i += F54_REPORT_DATA_SIZE) {
int size = min(F54_REPORT_DATA_SIZE, report_size - i);
...
rmi_read_block(.., f54->report_data + i, size);
}
report_data is allocated once at probe from F54's own electrode counts
(array3_size(f54->num_tx_electrodes, f54->num_rx_electrodes, sizeof(u16))),
but rmi_f54_get_report_size() computes the size from
drv_data->num_*_electrodes when those are set, i.e. from the F55
function's electrode counts. Both counts come straight from device
queries (F54 and F55 each report up to 255 electrodes) and nothing
constrains the F55 counts to the F54 ones.
A malicious or malfunctioning RMI4 device that reports larger F55
electrode counts than its F54 counts makes report_size exceed the
allocation, so the read loop writes past report_data (and the V4L2
dequeue memcpy() then reads past it). On conforming hardware the F55
configured electrodes are a subset of the F54 physical electrodes, so
report_size never exceeds the buffer and well-behaved devices are
unaffected.
Record the allocation size and reject a report that does not fit,
mirroring the existing zero-size check.
Fixes: c762cc6 ("Input: synaptics-rmi4 - propagate correct number of rx and tx electrodes to F54")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260626051802.4033172-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…rt path
[ Upstream commit d02f592064347e0c1e0d84f24941ad338838cc48 ]
In nft_flow_rule_offload_abort(), WARN_ON_ONCE(err) is triggered on every
error during rollback, including -ENOMEM. Memory allocation failures are
expected under low-memory conditions and do not indicate a kernel bug.
Trace for example:
nft_flow_offload_chain() // FLOW_BLOCK_BIND
nft_flow_block_chain()
nft_chain_offload_cmd()
nft_block_offload_cmd()
->ndo_setup_tc()
nsim_setup_tc()
flow_block_cb_setup_simple()
flow_block_cb_alloc() // fails to -ENOMEM
The warning was reproduced on the 5.10 stable kernel under memory pressure
via fault injection, but the underlying bug exists in mainline as well,
as demonstrated by the ENOMEM trace above. The following splat was
triggered during nf_tables transaction processing:
WARNING: CPU: 0 PID: 8567 at net/netfilter/nf_tables_offload.c:532 nft_flow_rule_offload_abort net/netfilter/nf_tables_offload.c:532 [inline]
WARNING: CPU: 0 PID: 8567 at net/netfilter/nf_tables_offload.c:532 nft_flow_rule_offload_commit+0x971/0xcd0 net/netfilter/nf_tables_offload.c:591
Modules linked in:
CPU: 0 PID: 8567 Comm: syz-executor.0 Not tainted 5.10.260-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:nft_flow_rule_offload_abort net/netfilter/nf_tables_offload.c:532 [inline]
RIP: 0010:nft_flow_rule_offload_commit+0x971/0xcd0 net/netfilter/nf_tables_offload.c:591
Call Trace:
nf_tables_commit+0x3bd/0x4bd0 net/netfilter/nf_tables_api.c:8604
nfnetlink_rcv_batch+0xb1e/0x1f20 net/netfilter/nfnetlink.c:509
nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:579 [inline]
nfnetlink_rcv+0x3b3/0x420 net/netfilter/nfnetlink.c:597
netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
netlink_unicast+0x6cd/0xa00 net/netfilter/af_netlink.c:1340
netlink_sendmsg+0x906/0xe10 net/netfilter/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:651 [inline]
__sock_sendmsg+0x155/0x190 net/socket.c:663
____sys_sendmsg+0x705/0x870 net/socket.c:2379
___sys_sendmsg+0x100/0x170 net/socket.c:2433
__sys_sendmsg+0xe9/0x1c0 net/socket.c:2462
do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x67/0xd1
Change the condition to WARN_ON_ONCE(err && err != -ENOMEM) so that
warnings are only emitted for unexpected errors. This aligns with the
common kernel practice of not warning on -ENOMEM.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 63b48c7 ("netfilter: nf_tables_offload: undo updates if transaction fails")
Signed-off-by: Alexey Velichayshiy <a.velichayshiy@ispras.ru>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2014ac62df9d45bb9a004a043e85df7be09ed780 ] nf_flow_table_iterate() only treats original-direction tuple nodes as owning entries. Publishing the original node first lets GC observe and free a flow while flow_offload_add() is still inserting the reply node. Publish the reply node first and the original node last so GC never sees a partially installed flow. KASAN can trigger slab-use-after-free read and write reports in the flowtable/rhashtable path (rht_deferred_worker, jhash, flow_offload_del, flow_offload_lookup, etc.). Fixes: ac2a666 ("netfilter: add generic flow table infrastructure") Signed-off-by: Jérémy Jean <Jeremy.Jean@oss.cyber.gouv.fr> Assisted-by: Codex:gpt-5 Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4cbd69766b35a089664cadb1f613bb85f7ef77a9 ] If list_set_uadd() calls list_set_replace() to swap an expired entry, the element count remains the same, therefore the increment must be elided. Fixes: 702b71e ("netfilter: ipset: Add element count to all set types header") Link: https://sashiko.dev/#/patchset/20260806101947.2802-1-fw%40strlen.de Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 490937b88cb592cc0c5367758edd700fd5abd15c ] For bitmap this change makes no difference, because destructors are called synchronously. List type however calls them via call_rcu() so accounting decrement can happen after list_set_flush() set ext_size to 0. 'set->elements = 0' can be removed for the same reason in the list type case, it calls 'set->elements--' for each element. Fixes: 9e41f26 ("netfilter: ipset: Count non-static extension memory for userspace") Suggested-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e16e960d55a40d36bd7c2494cc005e757dc9a1ef ] ipvlan devices inherit hard_header_len from phy_dev during ipvlan_init(), but leave needed_headroom and needed_tailroom set to 0. When the underlying phy_dev (or stacked lower device) requires extra headroom or tailroom for headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or veth with rx headroom), upper layers calculating packet headroom and tailroom fail to reserve sufficient space. This can result in reallocation overhead, skb headroom underflows, or KASAN slab-use-after-free crashes when dev_hard_header() / ipvlan_hard_header() prepends header data or when lower devices append tailroom. Fix this by: 1. Inheriting needed_headroom and needed_tailroom from phy_dev in ipvlan_init(). 2. Propagating needed_headroom and needed_tailroom updates to attached ipvlans in ipvlan_device_event() when receiving NETDEV_FEAT_CHANGE events. Fixes: 2ad7bf3 ("ipvlan: Initial check-in of the IPVLAN driver.") Reported-by: syzbot+1f9fd0f4b601cf88d6e6@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/6a720a21.40259c87.584f4.04bb.GAE@google.com/T/#u Reported-by: Tangxin Xie <xietangxin@h-partners.com> Closes: https://lore.kernel.org/netdev/CANn89i+1EW-sFNK8xoq98gMbPCeLS7e=+rs9gHfLg5Wj+4x0sw@mail.gmail.com/T/#mcc6307f115e500df23ea2980d5669fe95f20b6b4 Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Hangbin Liu <liuhangbin@kylinos.cn> Link: https://patch.msgid.link/20260806103857.115541-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cef51860becd9700217c81732ca1eb1ea6ed6fe1 ] macvlan devices inherit hard_header_len from lowerdev during macvlan_init(), but leave needed_headroom and needed_tailroom set to 0. When the underlying lowerdev requires extra headroom or tailroom for headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or veth with rx headroom), upper layers calculating packet headroom and tailroom fail to reserve sufficient space. This can result in reallocation overhead, skb headroom underflows, or KASAN slab-use-after-free crashes when dev_hard_header() / macvlan_hard_header() prepends header data or when lower devices append tailroom. Fix this by: 1. Inheriting needed_headroom and needed_tailroom from lowerdev in macvlan_init(). 2. Propagating needed_headroom and needed_tailroom updates to attached macvlans in macvlan_device_event() when receiving NETDEV_FEAT_CHANGE events. Fixes: b863ceb ("[NET]: Add macvlan driver") Reported-by: Tangxin Xie <xietangxin@h-partners.com> Closes: https://lore.kernel.org/netdev/CANn89i+1EW-sFNK8xoq98gMbPCeLS7e=+rs9gHfLg5Wj+4x0sw@mail.gmail.com/T/#m16adf0ff972cbfd8066c3a8e656e75eaeb12d021 Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Hangbin Liu <liuhangbin@kylinos.cn> Link: https://patch.msgid.link/20260806141938.287660-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01fdecc0480d916c799dbee584833a4a37e94d06 ] In packet_parse_headers(), when processing a VLAN-tagged frame, skb_set_network_header() is called to advance network_header past the VLAN tag to the inner protocol header. skb_probe_transport_header() is then called with skb->protocol still set to the outer VLAN EtherType (e.g. ETH_P_8021Q), while nhoff (derived from skb_network_offset()) already points past the VLAN tag to the inner protocol header. In __skb_flow_dissect(), proto is initialized to ETH_P_8021Q and nhoff points past the VLAN tag. When the dissector hits case ETH_P_8021Q, it reads a struct vlan_hdr at nhoff via __skb_header_pointer(), but that offset contains the inner protocol header (e.g. an IP header). The bytes are misinterpreted as a VLAN header, yielding a garbage encapsulated EtherType that matches no known protocol. The dissector returns false, so skb_probe_transport_header() never calls skb_set_transport_header(), leaving transport_header at its uninitialized sentinel value (~0U). Move skb_probe_transport_header() to before skb_set_network_header(). At the time skb_probe_transport_header() is called, network_header still points to the VLAN header, so nhoff correctly points to the VLAN header. The flow dissector can then parse the VLAN header, extract the inner EtherType, and advance nhoff to the inner protocol header, allowing transport_header to be set correctly. Fixes: dfed913 ("net/af_packet: add VLAN support for AF_PACKET SOCK_RAW GSO") Assisted-by: WChat:claude-opus-4-8 Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20260807063405.688780-2-wei.fang@oss.nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 976df67f463db1fddaf2a32fb04f57ad2891a23d ] When an async decrypt fails, tls_decrypt_done() records the error in ctx->async_wait.err and calls tls_err_abort(), which stores it in sk_err. tls_sw_recvmsg() and tls_sw_read_sock() each read async_wait.err once they hold the reader lock and fail the call: a record that did not authenticate breaks the connection. tls_sw_splice_read() has no such check, and sk_err does not stand in for one. tls_rx_rec_wait() tests sk_err only inside the loop it skips whenever a record is already parsed, and the first reader to reach sock_error() clears it, while async_wait.err persists. A splice therefore keeps delivering records on a connection that recvmsg() and read_sock() refuse to read. Read async_wait.err in tls_sw_splice_read() as the other two readers do. Fixes: f314bfe ("tls: rx: return the already-copied data on crypto error") Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Chuck Lever <cel@kernel.org> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://patch.msgid.link/20260806-tls-splice-crypto-fix-v1-1-a2624005a286@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f12afefb7b01f94d6d66d397f323a9914edbf70e ] The irq handlers take a struct device pointer and call dev_get_drvdata() to obtain the driver data. However, the driver data is only set at the end of probe, after devm_request_irq(), so an interrupt taken in between causes the handlers to pass a NULL pointer to readl() and crash. Pass the private data directly as the devm_request_irq() argument instead of the device pointer, matching what the handlers expect. Fixes: 6f6c3c3 ("ASoC: xlnx: add pcm formatter platform driver") Assisted-by: opencode:deepseek-v4-flash-free Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Michal Simek <michal.simek@amd.com> Link: https://patch.msgid.link/20260806233231.30631-1-rosenp@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6bcd76c134c55c697148acb5c0194e9666abdf84 ] syzbot reported a WARNING in __dev_queue_xmit() triggered via tpacket_snd(): skb_assert_len WARNING: at include/linux/skbuff.h:2753 skb_assert_len WARNING: at __dev_queue_xmit+0x21bc/0x4970 net/core/dev.c:4781 Call Trace: <TASK> dev_queue_xmit include/linux/netdevice.h:3448 [inline] packet_xmit+0x243/0x310 net/packet/af_packet.c:276 tpacket_snd net/packet/af_packet.c:2907 [inline] packet_sendmsg+0x28d6/0x4eb0 net/packet/af_packet.c:3134 When sending 0-byte packets via TPACKET ring buffer on devices with no hard header (e.g. dev->hard_header_len == 0), tpacket_fill_skb() populates an skb with skb->len == 0 and returns 0. tpacket_snd() then forwards this empty skb to packet_xmit(), causing __dev_queue_xmit() to hit skb_assert_len(skb). Similar checks exist in packet_snd() via commit dc63370 ("net/af_packet: check len when min_header_len equals to 0") and in packet_sendmsg_spkt() via commit 6a34172 ("af_packet: Don't send zero-byte data in packet_sendmsg_spkt()."). Return -EINVAL in tpacket_fill_skb() when skb->len is zero to reject zero-length packets in tpacket_snd(). Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: syzbot+30b93b6845b19cc38581@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/6a79e807.01d0871a.3a0d52.00ac.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev> Link: https://patch.msgid.link/20260810150447.1220864-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54a59ae ] Currently, the kfree_skb_reason() in sch_handle_{ingress,egress}() can only express a basic SKB_DROP_REASON_TC_INGRESS or SKB_DROP_REASON_TC_EGRESS reason. Victor kicked-off an initial proposal to make this more flexible by disambiguating verdict from return code by moving the verdict into struct tcf_result and letting tcf_classify() return a negative error. If hit, then two new drop reasons were added in the proposal, that is SKB_DROP_REASON_TC_INGRESS_ERROR as well as SKB_DROP_REASON_TC_EGRESS_ERROR. Further analysis of the actual error codes would have required to attach to tcf_classify via kprobe/kretprobe to more deeply debug skb and the returned error. In order to make the kfree_skb_reason() in sch_handle_{ingress,egress}() more extensible, it can be addressed in a more straight forward way, that is: Instead of placing the verdict into struct tcf_result, we can just put the drop reason in there, which does not require changes throughout various classful schedulers given the existing verdict logic can stay as is. Then, SKB_DROP_REASON_TC_ERROR{,_*} can be added to the enum skb_drop_reason to disambiguate between an error or an intentional drop. New drop reason error codes can be added successively to the tc code base. For internal error locations which have not yet been annotated with a SKB_DROP_REASON_TC_ERROR{,_*}, the fallback is SKB_DROP_REASON_TC_INGRESS and SKB_DROP_REASON_TC_EGRESS, respectively. Generic errors could be marked with a SKB_DROP_REASON_TC_ERROR code until they are converted to more specific ones if it is found that they would be useful for troubleshooting. While drop reasons have infrastructure for subsystem specific error codes which are currently used by mac80211 and ovs, Jakub mentioned that it is preferred for tc to use the enum skb_drop_reason core codes given it is a better fit and currently the tooling support is better, too. With regards to the latter: [...] I think Alastair (bpftrace) is working on auto-prettifying enums when bpftrace outputs maps. So we can do something like: $ bpftrace -e 'tracepoint:skb:kfree_skb { @[args->reason] = count(); }' Attaching 1 probe... ^C @[SKB_DROP_REASON_TC_INGRESS]: 2 @[SKB_CONSUMED]: 34 ^^^^^^^^^^^^ names!! Auto-magically. [...] Add a small helper tcf_set_drop_reason() which can be used to set the drop reason into the tcf_result. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Victor Nogueira <victor@mojatatu.com> Link: https://lore.kernel.org/netdev/20231006063233.74345d36@kernel.org Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20231009092655.22025-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: f60b396ee174 ("net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain") Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39d08b9 ] Add an initial user for the newly added tcf_set_drop_reason() helper to set the drop reason for internal errors leading to TC_ACT_SHOT inside {__,}tcf_classify(). Right now this only adds a very basic SKB_DROP_REASON_TC_ERROR as a generic fallback indicator to mark drop locations. Where needed, such locations can be converted to more specific codes, for example, when hitting the reclassification limit, etc. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Victor Nogueira <victor@mojatatu.com> Link: https://lore.kernel.org/r/20231009092655.22025-2-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: f60b396ee174 ("net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain") Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40cb2fd ] Getting the following splat [1] with CONFIG_DEBUG_NET=y and this reproducer [2]. Problem seems to be that classifiers clear 'struct tcf_result::drop_reason', thereby triggering the warning in __kfree_skb_reason() due to reason being 'SKB_NOT_DROPPED_YET' (0). Fixed by disambiguating a legit error from a verdict with a bogus drop_reason [1] WARNING: CPU: 0 PID: 181 at net/core/skbuff.c:1082 kfree_skb_reason+0x38/0x130 Modules linked in: CPU: 0 PID: 181 Comm: mausezahn Not tainted 6.6.0-rc6-custom-ge43e6d9582e0 #682 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014 RIP: 0010:kfree_skb_reason+0x38/0x130 [...] Call Trace: <IRQ> __netif_receive_skb_core.constprop.0+0x837/0xdb0 __netif_receive_skb_one_core+0x3c/0x70 process_backlog+0x95/0x130 __napi_poll+0x25/0x1b0 net_rx_action+0x29b/0x310 __do_softirq+0xc0/0x29b do_softirq+0x43/0x60 </IRQ> [2] ip link add name veth0 type veth peer name veth1 ip link set dev veth0 up ip link set dev veth1 up tc qdisc add dev veth1 clsact tc filter add dev veth1 ingress pref 1 proto all flower dst_mac 00:11:22:33:44:55 action drop mausezahn veth0 -a own -b 00:11:22:33:44:55 -q -c 1 Ido reported: [...] getting the following splat [1] with CONFIG_DEBUG_NET=y and this reproducer [2]. Problem seems to be that classifiers clear 'struct tcf_result::drop_reason', thereby triggering the warning in __kfree_skb_reason() due to reason being 'SKB_NOT_DROPPED_YET' (0). [...] [1] WARNING: CPU: 0 PID: 181 at net/core/skbuff.c:1082 kfree_skb_reason+0x38/0x130 Modules linked in: CPU: 0 PID: 181 Comm: mausezahn Not tainted 6.6.0-rc6-custom-ge43e6d9582e0 #682 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014 RIP: 0010:kfree_skb_reason+0x38/0x130 [...] Call Trace: <IRQ> __netif_receive_skb_core.constprop.0+0x837/0xdb0 __netif_receive_skb_one_core+0x3c/0x70 process_backlog+0x95/0x130 __napi_poll+0x25/0x1b0 net_rx_action+0x29b/0x310 __do_softirq+0xc0/0x29b do_softirq+0x43/0x60 </IRQ> [2] #!/bin/bash ip link add name veth0 type veth peer name veth1 ip link set dev veth0 up ip link set dev veth1 up tc qdisc add dev veth1 clsact tc filter add dev veth1 ingress pref 1 proto all flower dst_mac 00:11:22:33:44:55 action drop mausezahn veth0 -a own -b 00:11:22:33:44:55 -q -c 1 What happens is that inside most classifiers the tcf_result is copied over from a filter template e.g. *res = f->res which then implicitly overrides the prior SKB_DROP_REASON_TC_{INGRESS,EGRESS} default drop code which was set via sch_handle_{ingress,egress}() for kfree_skb_reason(). Commit text above copied verbatim from Daniel. The general idea of the patch is not very different from what Ido originally posted but instead done at the cls_api codepath. Fixes: 54a59ae ("net, sched: Make tc-related drop reason more flexible") Reported-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/netdev/ZTjY959R+AFXf3Xy@shredder Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: f60b396ee174 ("net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain") Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f57dd9 ] Commit da37845 ("packet: uses kfree_skb() for errors.") switches from consume_skb to kfree_skb to improve error handling. However, this could bring a lot of noises when we monitor real packet drops in kfree_skb[1], because in tpacket_rcv or packet_rcv only packet clones can be freed, not actual packets. Adding a generic drop reason to allow distinguish these "clone drops". [1]: https://lore.kernel.org/netdev/CABWYdi00L+O30Q=Zah28QwZ_5RU-xcxLFUK2Zj08A8MrLk9jzg@mail.gmail.com/ Fixes: da37845 ("packet: uses kfree_skb() for errors.") Suggested-by: Eric Dumazet <edumazet@google.com> Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Signed-off-by: Yan Zhai <yan@cloudflare.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/ZW4piNbx3IenYnuw@debian.debian Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: f60b396ee174 ("net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain") Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb27807 ] Move drop_reason from struct tcf_result to skb cb - more specifically to struct tc_skb_cb. With that, we'll be able to also set the drop reason for the remaining qdiscs (aside from clsact) that do not have access to tcf_result when time comes to set the skb drop reason. Signed-off-by: Victor Nogueira <victor@mojatatu.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: f60b396ee174 ("net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain") Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4cf24dc ] Continue expanding Daniel's patch by adding new skb drop reasons that are idiosyncratic to TC. More specifically: - SKB_DROP_REASON_TC_COOKIE_ERROR: An error occurred whilst processing a tc ext cookie. - SKB_DROP_REASON_TC_CHAIN_NOTFOUND: tc chain lookup failed. - SKB_DROP_REASON_TC_RECLASSIFY_LOOP: tc exceeded max reclassify loop iterations Signed-off-by: Victor Nogueira <victor@mojatatu.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: f60b396ee174 ("net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain") Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f60b396ee174206fe08ebf997d16cd3801b77b22 ] tcf_action_exec() handles TC_ACT_GOTO_CHAIN by first checking rcu_access_pointer(a->goto_chain) and then calling tcf_action_goto_chain_exec(), which does a second, independent rcu_dereference_bh(a->goto_chain) read and immediately dereferences chain->filter_chain. A concurrent tcf_action_set_ctrlact() (e.g. the gact replace path) can clear a->goto_chain between the two reads, so the second read returns NULL and tcf_action_goto_chain_exec() dereferences NULL. Fix the race by doing a single rcu_dereference_bh() read of a->goto_chain in tcf_action_exec(), checking it once for NULL, and passing the resulting chain pointer into tcf_action_goto_chain_exec(). This turns the split check/use into a single check/use on one value. Fixes: ee3bbfe ("net/sched: let actions use RCU to access 'goto_chain'") Reported-by: vega@nebusec.ai Tested-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Davide Caratti <dcaratti@redhat.com> Link: https://patch.msgid.link/20260809090928.868186-1-jhs@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d3724e616faf952c3adcf8414fc21a828ef3709 ]
u32_walk() enumerates both struct tc_u_hnode and struct tc_u_knode
through the walker callback. u32_bind_class() unconditionally casts the
passed fh to tc_u_knode and accesses &n->res, so when fh is actually a
tc_u_hnode, which has no tcf_result member, this results in a
slab-out-of-bounds read of res->classid in tc_cls_bind_class().
The issue can be reproduced with the following commands:
tc qdisc add dev lo root handle 1: hfsc
tc class add dev lo parent 1: classid 1:1 hfsc sc rate 1000kbit
tc filter add dev lo parent 1:1 protocol ip prio 1 u32 match u32 0 0 flowid 1:1
tc class add dev lo parent 1: classid 1:2 hfsc sc rate 2000kbit
Fix this by skipping hash tables via the TC_U32_KEY(handle) check.
Fixes: 07d79fc ("net_sched: add reverse binding for tc class")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/1786089038-36366-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c8ed1b ] Instead of using arch_dma_alloc if none of the generic coherent allocators are used, require the architectures to explicitly opt into providing it. This will used to deal with the case of m68knommu and coldfire where we can't do any coherent allocations whatsoever, and also makes it clear that arch_dma_alloc is a last resort. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Tested-by: Greg Ungerer <gerg@linux-m68k.org> Stable-dep-of: 1fd495ef09ee ("m68k: Define NR_CPUS to 1") Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e28bf8 ] Coldfire cores configured without a data cache are DMA coherent and should thus simply use the simple coherent version of dma-direct. Introduce a new COLDFIRE_COHERENT_DMA Kconfig symbol as a convenient short hand for such configurations, and a M68K_NONCOHERENT_DMA symbol for all cases where we need to build non-coherent DMA infrastructure to simplify the Kconfig and code conditionals. Not building the non-coherent DMA code slightly reduces the code size for such configurations. Numers for m5249evb_defconfig below: text data bss dec hex filename 2896158 401052 65392 3362602 334f2a vmlinux.before 2895166 400988 65392 3361546 334b0a vmlinux.after Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Greg Ungerer <gerg@linux-m68k.org> Stable-dep-of: 1fd495ef09ee ("m68k: Define NR_CPUS to 1") Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1fd495ef09eef96169a379a749c24b5e69974bb8 ]
This fixes a Kconfig warning
fs/erofs/Kconfig:137:warning: range is invalid
which originates from EROFS_FS_ZIP_LZMA_DEFAULT_MAX_STREAMS using
NR_CPUS which up to now didn't exist for ARCH=m68k. All other
architectures define this symbol, so fix the outlier.
[geert] This also fixes:
- CONFIG_EROFS_FS_ZIP_LZMA_DEFAULT_MAX_STREAMS being set to the
literal NR_CPUS instead of a number by automatic configs like
"make allmodconfig" or "make olddefconfig",
- An infinite loop in manual configs like "make oldconfig" when
CONFIG_EROFS_FS_ZIP_LZMA_DEFAULT_MAX_STREAMS is not present or
has an invalid value in your existing .config.
Fixes: c9b47e6b2311 ("erofs: cap LZMA stream pool size")
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/20260731094950.1988084-2-ukleinek@kernel.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36a05d2820077bb3955acb8111e1041d39148037 ] On the packet reception path, the ID of the MAC Port on which the packet was received, is embedded in the RX DMA Descriptor's metadata. The ID is extracted using the helper function cppi5_desc_get_tags_ids() which fills in the 16-bit Source Tag into the 'port_id' variable. However, it is only the lower 8-bits of the 16-bit Source Tag that represent the MAC Port ID, while the upper 8-bits are Hardware-Reserved and carry an arbitrary value. With the existing logic, sporadic kernel crash is observed due to the subsequent driver code accessing out-of-bound memory because of an invalid port_id. Hence, fix the port_id extraction logic to use only the lower 8-bits of the Source Tag as the MAC Port ID. Fixes: 93a7653 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Chintan Vankar <c-vankar@ti.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260807111738.2055900-1-s-vadapalli@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
…vice [ Upstream commit 120977e2c096deea4e866e4273be9220b957c29e ] cls_bpf_prog_from_efd() obtained a SCHED_CLS program via bpf_prog_get_type_dev() but never verified that a device-bound (offloaded) program's bound netdev matches the TC netdev the classifier is being attached to. This let a program loaded with prog_ifindex for device A be attached via cls_bpf + skip_sw to device B; deleting device A then destroyed the program's offload state while it was still attached to device B, triggering a netdevsim WARN (panic with panic_on_warn=1). Mirror the XDP attach path (net/core/dev.c) and reject the attach with -EINVAL when a dev-bound program's bound device does not match the target device. Fixes: 2b3486b ("bpf: Introduce device-bound XDP programs") Reported-by: vega@nebusec.ai Tested-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://patch.msgid.link/20260809094418.901607-1-jhs@mojatatu.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a64d500b0078e16e9abb25baca4dee1dbc9054fc ] CONFIG_NR_CPUS doesn't define on some UP platforms (e.g. arm), so this can cause make oldconfig to loop indefinitely when CONFIG_SMP=n: $ make ARCH=arm allmodconfig $ sed -i "/CONFIG_SMP=y/d" .config $ sed -i "/CONFIG_EROFS_FS_ZIP_LZMA_DEFAULT_MAX_STREAMS.*/d" .config EROFS LZMA default maximum decompression streams (EROFS_FS_ZIP_LZMA_DEFAULT_MAX_STREAMS) [0] (NEW) EROFS LZMA default maximum decompression streams (EROFS_FS_ZIP_LZMA_DEFAULT_MAX_STREAMS) [0] (NEW) ... Let's guard NR_CPUS with SMP instead of using a hardcoded arbitrary CPU uplimit here, similar to commit a334407 ("mm: make SPLIT_PTE_PTLOCKS depend on SMP"). The initial report from SJ Park was for m68k [1] (m68k is the only arch without NR_CPUS in Kconfig), and that got fixed in commit 1fd495ef09ee ("m68k: Define NR_CPUS to 1") Reported-by: SJ Park <sj@kernel.org> Link: https://lore.kernel.org/all/anuyFHLUGDjZWY4K@XiangdeMacBook-Pro.local/T/#u [1] Closes: https://lore.kernel.org/r/20260728065447.91511-1-sj@kernel.org Reported-by: Guenter Roeck <groeck7@gmail.com> Closes: https://lore.kernel.org/r/87853c96-cc8f-49e6-81b1-02bfe409e372@roeck-us.net Fixes: c9b47e6b2311 ("erofs: cap LZMA stream pool size") Signed-off-by: Gao Xiang <xiang@kernel.org> Tested-by: SJ Park <sj@kernel.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2195424c3da2ef1829a63b807e3a900a90e57d85 upstream. The x25 timers are armed with mod_timer() and cancelled with timer_delete(), so a pending timer holds no reference on the socket and a cancel does not wait for a callback already running on another CPU. x25_heartbeat_expiry() also rearms unconditionally, so it can reinstall sk->sk_timer after __x25_destroy_socket() has passed its cancel point. The following __sock_put() frees the socket while the timer is still queued, and the next expiry uses freed memory. KASAN reports a slab-use-after-free on the kmalloc-2k object freed by close(). timer_delete_sync() cannot be used here: x25_heartbeat_expiry() and x25_timer_expiry() both reach the cancels from inside the timer they would wait on, through __x25_destroy_socket() and x25_disconnect(). Arm the timers with sk_reset_timer() and cancel them with sk_stop_timer() so that an armed timer owns a reference, and release it in both expiry handlers. Rearm the heartbeat only while sk_hashed(sk) is still true, since __x25_destroy_socket() unlinks the socket before dropping it. Arm the deferred destroy timer the same way and drop its reference in x25_destroy_timer(). Reproduced on net with KASAN, with the heartbeat period shortened so the window recurs. With this patch the reproducer no longer triggers a report and /proc/net/x25 drains. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> Fixes: 1da177e ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Baul Lee <baul.lee@xbow.com> Link: https://patch.msgid.link/20260726220342.47245-1-baul.lee@xbow.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ adjusted context due to `del_timer()` not yet renamed to `timer_delete()` ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fa5990ca8fd917003e526036bcc50413edb9722c upstream. For MISC_FMT_OPEN_FILE entries load_misc_binary() clones the registered interpreter file and denies write access to the clone via plain deny_write_access(). The clone is installed as bprm->interpreter and later released by the exec machinery through exe_file_allow_write_access() which skips the i_writecount increment for files with FMODE_FSNOTIFY_HSM set. The deny and allow side can therefore come to different conclusions when pre-content watches are in play: if a pre-content watch is added to the interpreter after registration every subsequent exec through that entry takes a write denial on the clone that is never paired with a write allowance, driving the interpreter inode's i_writecount further down with each exec and leaving the interpreter unwritable even after the entry and all its users are gone. Take the write denial via exe_file_deny_write_access() so both sides of the pairing base their decision on the same file mode, and propagate failure instead of silently ignoring it: an interpreter that is concurrently open for writing now fails the exec with ETXTBSY, exactly like an interpreter freshly opened via open_exec() would. Link: https://patch.msgid.link/20260710-work-binfmt_misc-locking-v3-2-a162f7cb58d6@kernel.org Fixes: 0357ef0 ("fs: don't block write during exec on pre-content watched files") Cc: stable@vger.kernel.org Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3ed6de upstream. After the blamed commits below, some UDP tunnel use dstats for accounting. On the xmit path, all the UDP-base tunnels ends up using iptunnel_xmit_stats() for stats accounting, and the latter assumes the relevant (tunnel) network device uses tstats. The end result is some 'funny' stat report for the mentioned UDP tunnel, e.g. when no packet is actually dropped and a bunch of packets are transmitted: gnv2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue \ state UNKNOWN mode DEFAULT group default qlen 1000 link/ether ee:7d:09:87:90:ea brd ff:ff:ff:ff:ff:ff RX: bytes packets errors dropped missed mcast 14916 23 0 15 0 0 TX: bytes packets errors dropped carrier collsns 0 1566 0 0 0 0 Address the issue ensuring the same binary layout for the overlapping fields of dstats and tstats. While this solution is a bit hackish, is smaller and with no performance pitfall compared to other alternatives i.e. supporting both dstat and tstat in iptunnel_xmit_stats() or reverting the blamed commit. With time we should possibly move all the IP-based tunnel (and virtual devices) to dstats. Fixes: c77200c ("bareudp: Handle stats using NETDEV_PCPU_STAT_DSTATS.") Fixes: 6fa6de3 ("geneve: Handle stats using NETDEV_PCPU_STAT_DSTATS.") Fixes: be22635 ("vxlan: Handle stats using NETDEV_PCPU_STAT_DSTATS.") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Link: https://patch.msgid.link/2e1c444cf0f63ae472baff29862c4c869be17031.1738432804.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f115d2b ] The function ring_buffer_swap_cpu() has a bunch of jumps to the label out that simply returns "ret". There's no reason to jump to a label that simply returns a value. Just return directly from there. This goes back to almost the beginning when commit 8aabee5 ("ring-buffer: remove unneeded get_online_cpus") was introduced. That commit removed a put_online_cpus() from that label, but never updated all the jumps to it that now no longer needed to do anything but return a value. Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20250527145753.6b45d840@gandalf.local.home Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Stable-dep-of: f27bdc43077e ("ring-buffer: Use current_context for safe per-CPU buffer swap") Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f27bdc43077e4fcb5557dfc315ee8d91e741f483 ]
The ring_buffer_swap_cpu() function currently checks the per-CPU
committing counter to determine if a buffer is actively being written to
before performing the swap. However, there exists a race window where
this check can be bypassed:
ring_buffer_lock_reserve
cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_a
rb_reserve_next_event
rb_start_commit // inc committing
if (unlikely(READ_ONCE(cpu_buffer->buffer) != buffer)) {...}
__rb_reserve_next
rb_move_tail
rb_end_commit(cpu_buffer); // dec committing => 0
/* interrupt hits here, successfully swaps! */
local_inc(&cpu_buffer->committing);
ring_buffer_unlock_commit
cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_b
rb_commit
rb_end_commit
RB_WARN_ON(cpu_buffer, !local_read(&cpu_buffer->committing))
// triggers warning
The committing counter can temporarily drop to 0 during a single write
operation (within rb_move_tail), creating a window where swap can
succeed even though the write is still in progress. This leads to
inconsistent buffer state and triggers the RB_WARN_ON in rb_commit().
Replace the committing counter check with current_context checks, which
are set at the entry of ring_buffer_lock_reserve() and remain valid
throughout the entire write operation, providing a reliable indicator of
buffer busy state during swap.
Cc: stable@vger.kernel.org
Fixes: 4239c38 ("ring-buffer: Process commits whenever moving to a new page.")
Link: https://patch.msgid.link/20260803005640.2445666-2-wutengda@huaweicloud.com
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Link: https://lore.kernel.org/r/20260820145211.194104353@linuxfoundation.org Tested-by: Brett A C Sheffield <bacs@librecast.net> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Miguel Ojeda <ojeda@kernel.org> Tested-by: Peter Schneider <pschneider1968@googlemail.com> Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> Tested-by: Barry K. Nathan <barryn@pobox.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Wentao Guan <guanwentao@uniontech.com> Link: https://lore.kernel.org/r/20260821142844.249995408@linuxfoundation.org Tested-by: Miguel Ojeda <ojeda@kernel.org> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Pavel Machek (CIP) <pavel@nabladev.com> Tested-by: Mark Brown <broonie@kernel.org> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Brett A C Sheffield <bacs@librecast.net> Tested-by: Peter Schneider <pschneider1968@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
19 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Sync with upstream v6.6.153