Enable Music Video Downloading

[tsposato]

I followed the instructions, ran the install script and I see the scripts etc. in the required folders.

9805d6ed5f99:/custom-services.d# ls -lha
total 159K
drwxr-xr-x 3 hotio hotio   11 Oct  5 22:20 .
drwxr-xr-x 1 root  root    13 Oct  5 22:07 ..
-rwxr-xr-x 1 hotio hotio  927 Oct  5 22:20 ARLChecker
-rwxr-xr-x 1 hotio hotio  81K Oct  5 22:20 Audio
-rwxr-xr-x 1 hotio hotio  17K Oct  5 22:20 AutoArtistAdder
-rwxr-xr-x 1 hotio hotio  13K Oct  5 22:20 AutoConfig
-rwxr-xr-x 1 hotio hotio 4.4K Oct  5 22:20 QueueCleaner
-rwxr-xr-x 1 hotio hotio  24K Oct  5 22:20 TidalVideoDownloader
-rwxr-xr-x 1 hotio hotio 2.0K Oct  5 22:20 UnmappedFilesCleaner
-rwxr-xr-x 1 hotio hotio  31K Oct  5 22:20 Video
drwxr-xr-x 2 hotio hotio    3 Oct  5 22:20 python

My extended.conf:

9805d6ed5f99:/config# cat extended.conf 
##### LIDARR EXTENDED SCRIPTS SETTINGS #####

##### PATHS
#downloadPath="/config/extended/downloads" # OPTIONAL, only change if needed.... Temporary Download Location for incoming Audio files from included clients
#importPath="/config/extended/import"      # OPTIONAL, only change if needed.... Completed downloads are stored here for the Usenet Blackhole client to import from. When Using queue cleaner, failed imports will be automatically cleaned up.
videoPath="/data/Music/Videos"             # Final destination/location of completed Videos

##### SCRIPT ENABLEMENT
enableAutoConfig="true"            # true = enabled :: Automatically configures Lidarr with optimal settings
enableAudio="true"                 # true = enabled :: Enables the Audio script to run automatically
enableVideo="true"                 # true = enabled :: Enables the Video script to run automatically
enableUnmappedFilesCleaner="false" # true = enabled :: Enables the UnmappedFilesCleaner script to run automatically
enableQueueCleaner="true"          # true = enabled :: Enables the QueueCleaner script to run automatically

##### SCRIPT INTERVALS
audioScriptInterval=15m                 #s or #m or #h or #d :: s = seconds, m = minutes, h = hours, d = days :: Amount of time between each script run, when script is enabled
videoScriptInterval=15m                 #s or #m or #h or #d :: s = seconds, m = minutes, h = hours, d = days :: Amount of time between each script run, when script is enabled
autoArtistAdderInterval=12h             #s or #m or #h or #d :: s = seconds, m = minutes, h = hours, d = days :: Amount of time between each script run, when script is enabled
unmappedFolderCleanerScriptInterval=15m #s or #m or #h or #d :: s = seconds, m = minutes, h = hours, d = days :: Amount of time between each script run, when script is enabled
queueCleanerScriptInterval=15m          #s or #m or #h or #d :: s = seconds, m = minutes, h = hours, d = days :: Amount of time between each script run, when script is enabled

##### AUTOCONFIG SCRIPT SETTINGS
configureMediaManagement="false"               # Configures Lidarr Media Management Settings
configureMetadataConsumerSettings="false"      # Configures Lidarr Metadata Consumer Settings
configureMetadataProviderSettings="false"      # Configures Lidarr Metadata Provider Settings
configureCustomScripts="true"                  # Adds custom scripts to Lidarr
configureLidarrUiSettings="false"              # Configures Lidarr UI Settings
configureMetadataProfileSettings="false"       # Configures Lidarr Metadata Profile Settings
configureTrackNamingSettings="false"           # Configures Lidarr Track Naming Settings

##### AUDIO SCRIPT
# SEARCH
searchSort="date"                 # date or album :: Sorts the missing/cutoff list by release date (newest -> oldest) or album type (album -> single) for processing the list
matchDistance="3"                 # The number of changes required to transform the searched album title into a possible found album title match... (0, requires a perfect match)
lidarrSearchForMissing="true"     # true = enabled :: When artists are added, search for them using Lidarr's built in functionality
retryNotFound="90"                ## :: Number of days between re-attempting the download of previously notfound albums
ignoreInstrumentalRelease="false" # true = enabled :: Skips albums releases that have the word "instrumental" in either the title or disambiguation
preferSpecialEditions="true"      # true = enabled :: This changes the release title sort order, when true, it will search for releases with longest release names first, which are more likely to be deluxe/special versions...

# CLIENT
dlClientSource="both"                # deezer, tidal or both :: set to both, to use both clients, tidal requires extra steps, view logging output
arlToken=""                            # OPTIONAL (fallback using Freyr) - User ARL token for deemix client
tidalCountryCode="US"                  # Country Code required for tidal
failedDownloadAttemptThreshold="6"     # Maximum number of attempts to download a particular album ID from the service before considering it a failed download...
deezerClientTestDownloadId="197472472" # A known good deezer track id that is used to test/verify the client is functioning in the event all download attempts have failed. Prevents the script from exiting...
tidalClientTestDownloadId="166356219"  # A known good tidal track id that is used to test/verify the client is functioning in the event all download attempts have failed. Prevents the script from exiting...
downloadClientTimeOut="10m"            # 's' for seconds (the default), 'm' for minutes, 'h' for hours or 'd' for days :: Kills freyr download client after the set timeout period, prevents lock ups...

# QUALITY
audioLyricType="both"   # both or explicit or clean :: both, is explicit preferred matching, explicit is explicit releases only matching and clean is clean releases only matching
audioFormat="native"    # native or alac or mp3 or aac or opus :: native is the native download client file type, selected by the matching audio bit-rate
audioBitrate="lossless" # master or lossless or high or low or ### :: master = MQA/lossless flac files, lossless = flac files, high = 320K, low = 128k/96k, ### = the output bit-rate of converted lossless files to selected audioFormat that is not native, example: 192...
requireQuality="false"  # true = enabled :: Downloads will be checked for quality and require to have the requested file format & quality

# POST PROCESSING
enableBeetsTagging="true"   # true = enabled :: Downloads will be processed and tagged by Beets
beetsMatchPercentage="90"   # 1-100 :: Set this to the minimum percentage required for Beets to match the downloaded album to a musicbrainz release :: Lower percentage is less restrictive
enableReplaygainTags="true" # true = enabled :: Downloads will be tagged with ReplayGain Metadata

# ADD ARTIST AUTOMATION
addDeezerTopArtists="false"              # true = enabled :: Enabling this will enable the extended script to automatically add artists that are on the Deezer Top Artist Chart to your existing Lidarr instance
addDeezerTopAlbumArtists="false"         # true = enabled :: Enabling this will enable the extended script to automatically add artists that are on the Deezer Top Album Chart to your existing Lidarr instance
addDeezerTopTrackArtists="false"         # true = enabled :: Enabling this will enable the extended script to automatically add artists that are on the Deezer Top Track Chart to your existing Lidarr instance
topLimit="3"                             # This setting controls the amount of Top Artist (Albums/Tracks/Artists) to add to Lidarr from Deezer
addRelatedArtists="false"                # true = enabled :: WARNING !!! WARNING !!! Enabling this can cause an endless loop of additional artists.... Enabling this will enable the extended script to automatically add artists that are related to your existing Lidarr artists from Tidal & Deezer
numberOfRelatedArtistsToAddPerArtist="1" # 1-20 :: This will limit the number of related artists to add per artist in your library :: Minimum is 1, Maximum is 20
autoArtistAdderMonitored="true"          # true or false :: If true, artists that are added automatically are monitored, when false they are added in an unmonitored state
preventRelatedArtistsLoop="true"         # true = enabled :: This will prevent added related artists from adding additional related artists, thus killing an endless loop. This works by using the Lidarr's tag system (arr-extended), Remove tag from artist to allow it to be proessed for related artists...

##### VIDEO SCRIPT
addFeaturedVideoArtists="true"  # true = enabled :: WARNING !!! WARNING !!! Enabling this can cause an endless loop of additional artists.... Enabling this will enable the extended Video script to automatically add Music Video Featured Artists to your existing Lidarr artists from IMVDB
videoFormat="bv[width>=1920]+ba" # ONLY CHANGE if you know what your doing, for guidence, please see yt-dlp documentation.
videoInfoJson="false"            # true = enabled :: Stores yt-dlp info-json files alongside video files.
youtubeSubtitleLanguage="en"     # Desired Language Code :: For guidence, please see yt-dlp documentation.
disableImvd="false"              # true = enabled :: Use this to disable IMVDB as a source, will result in only tidal videos

##### PLEX NOTIFY SCRIPT
plexUrl=""   # ONLY used if PlexNotify.bash is used, example: http://x.x.x.x:32400
plexToken="" # ONLY used if PlexNotify.bash is used

##### DEEZER ARLCHECKER
arlUpdateInterval="24h"   # Interval to check ARL Validity (default 24 hours). Reboot container after changing. s = seconds, m = minutes, h = hours, d = days
telegramBotEnable="false" # Enable/Disable  Telegram Bot to notify if ARL expires. Otherwise check text file in custom-services.d/python for status.
telegramBotToken=""       # Get token from BotFather during bot creation. If you use a notify channel for Lidarr, you can probably use the same bot, as this script only takes temporary control.
telegramUserChatID=""     # Get your userid by chatting: t.me/userinfobot
pushoverEnable="false"    # Pushover Notification Support
pushoverUserKey=""
pushoverAppAPIKey=""
ntfyEnable="false"        # ntfy Notification Support
ntfyServerTopic=""        # Put your server + topic address ex: https://ntfy.mydomain.com/lidarr
ntfyUserToken=""          # create a new user token using the ntfy cli commands. See ntfy documentation on how to do that.
AppriseEnable="false"     # Enable/Disable Apprise, a versatile tool for sending notifications to over 100 services.
AppriseString=""          # Enter your Apprise URL here (e.g., discord://webhook_id/webhook_token, mailto://user:pass@example.com). See https://github.com/caronc/apprise/wiki for details.

I don't see anything in the logs, I've downloaded several music albums too.
What should I be looking for?

[tsposato]

I'm using ghcr.io/hotio/lidarr:release which is based on alpine linux...
I'm guessing that's why it doesn't work?

[tsposato]

I switched to the https://docs.linuxserver.io/images/docker-radarr image and everything is working fine.